A Lemon-powered Light🍋 (Procedure Text)

 A Lemon-powered Light🍋

by: Aisha Akta Medina & Nesya Callista Putri



  1. Materials

  1. Four lemons (the more lemons we use, the more power can be generated)

  2. A small-and-low voltage LED light bulb 

  3. Four coppers

  4. Galvanized nails (the same number as the number of lemons used), means that it’s coated in Zinc.

  5. Two electrical wires or alligator clips

  1. Tools

  1. A wire cutter

  1. Instruction

  1. Roll and squeeze the lemons a little bit by hand to release the juice inside.

  2. Prepare the wires (cut the copper wire into four 6-inch lengths. Strip about 1 inch of insulation from both ends of each wire. These will become the electrodes)

  3. Insert electrodes into a lemon (In each lemon, make two holes, insert 1 nail and 1 small strip of copper wire. Leave a small secti on in each one out for the electrical wires to connect)

  4. Create Four Lemon Batteries (Using an electrical wire, connect the nail in one lemon to the copper strip in another lemon. Do this to each lemon to form a chain), To get a higher voltage with your lemon batteries

  5. In the first lemon, connect the copper to the long leg of the LED light. In the last lemon, connect the nail to the shorter end of the LED light (the shorter leg comes out of the flat side of the LED).

Procedure Video



Comments

Popular posts from this blog

Welwitschia Mirabilis (Plant Kingdom)

International Friendship Day (Event)

10 Productivity at Home